PA POM plastic coated bearing + stainless steel external thread

Send Inquiry

Description
Technical diameters

Inquiry	PDF	PA POM plastic coated bearing + stainless steel external thread		Lagging size			Built-in bearing	Screw size			Replacement of Misumi code name
Inquiry	PDF	serial number	bearing No.	Inner diameter mm	Outer diameter mm	Thickness mm	Built-in bearing	Step protruding C	Screw length L	Thread M	Replacement of Misumi code name
		601	6200-40-12C2L12M8	10	40	12	6200	2	12	8	EBH40
		602	6002-40-12C1L12M10	15	40	12	6002	/	12	10	/
		603	6002-40-12C3.5L12M10	15	40	12	6002	3.5	12	10	/
		604	6002-40-12C1L20M10	15	40	12	6002	/	20	10	/
		605	608-40-13C1L10M6	8	40	13	608	/	10	6	/
		606	608-40-13C1L10M8	8	40	13	608	/	10	8	/
		607	608-40-13C1.5L10M8	8	40	13	608	1.5	10	8	/
		608	608-40-13C2L10M8	8	40	13	608	2	10	8	/
		609	608-40-13C1.5L15M8	8	40	13	608	1.5	15	8	/
		610	6001-40-13C1.5L12M10	12	40	13	6001	1.5	12	10	/
		611	6001-40-13C2.5L12M10	12	40	13	6001	2.5	12	10	/
		612	6001-40-13C3.5L12M10	12	40	13	6001	3.5	12	10	/
		613	6001-40-13C5.5L20M10	12	40	13	6001	5.5	20	10	/
		614	6200-40-13C1.5L10M8	10	40	13	6200	1.5	10	8	/
		615	6200-40-13C2.5L10M8	10	40	13	6200	2.5	10	8	/
		616	6200-40-13C3L10M8	10	40	13	6200	3	10	8	/
		617	6200-40-13C1.5L12M8	10	40	13	6200	1.5	12	8	/
		618	6002-40-16C6.5L15M10	15	40	16	6002	6.5	15	10	/
		619	6202-42-15C1L12M10	15	42	15	6202	/	12	10	/
		620	6202-42-15C2L12M10	15	42	15	6202	2	12	10	/
		621	6202-42-15C6L12M10	15	42	15	6202	6	12	10	/
		622	6202-42-15C1L20M10	15	42	15	6202	/	20	10	/
		623	6202-43-11C3L12M10	15	43	11	6202	3	12	10	/
		624	6202-43-11C4L12M10	15	43	11	6202	/	12	10	/
		625	6202-43-11C8L12M10	15	43	11	6202	8	12	10	/
		626	6202-43-11C3L20M10	15	43	11	6202	3	20	10	/
		627	6202-44-16C1.5L12M10	15	44	16	6202	1.5	12	10	/
		628	6202-44-16C5.5L12M10	15	44	16	6202	5.5	12	10	/
		629	6200-45-12C1L8M6	10	45	12	6200	/	8	6	/
		630	6200-45-12C3L10M8	10	45	12	6200	3	10	8	/
Previous 1 2...18 19 202122 23 24 Next

1. What is a rubber-coated bearing?

A rubber-coated bearing refers to a non-standard bearing suitable for use under certain conditions, formed by injecting or bonding rubber products on the bearing surface through a casting mold.

2. Characteristics and classification of rubber-coated bearings

Rubber-coated bearings have excellent strength and wear resistance, heat resistance, hydrolysis resistance, and aging resistance. They have bright appearance, fine and smooth colloid surface, strong bonding between the colloid material and the shaft core, and a wide range of hardness.

In addition, rubber-coated bearings have the advantages of shock load resistance and low noise compared to ordinary bearings. Commonly used coating materials include the following:

(1) Polyurethane rubber rollers have good chemical properties, good solvent resistance, anti-aging, tear resistance, and good resilience.

(2) Silicone rubber coated bearings have good heat resistance, cold resistance, ozone and atmospheric aging resistance. The lack of electricity results in poor mechanical properties such as tensile strength and tear strength, and poor oil resistance and organic solvent resistance.

(3) Polyacetal (POM) coated bearings have high mechanical strength and rigidity, high fatigue strength, good resistance to organic solvents, and stronger wear resistance than polyurethane. However, they have the disadvantages of poor acid resistance, large molding shrinkage, and long life.

Easily decomposes under high temperature.

In addition, there are also rubber-coated bearings made of nitrile rubber, fluororubber and other coating materials.