PA POM plastic coated bearing + stainless steel external thread

Send Inquiry

Description
Technical diameters

Inquiry	PDF	PA POM plastic coated bearing + stainless steel external thread		Lagging size			Built-in bearing	Screw size			Replacement of Misumi code name
Inquiry	PDF	serial number	bearing No.	Inner diameter mm	Outer diameter mm	Thickness mm	Built-in bearing	Step protruding C	Screw length L	Thread M	Replacement of Misumi code name
		541	608-35-15C0.5L15M8	8	35	15	608	0.5	15	8	/
		542	6200-35-16C1L10M8	10	35	16	6200	/	10	8	/
		543	6200-35-16C1.5L10M8	10	35	16	6200	1.5	10	8	/
		544	608-35-18C3L8M6	8	35	18	608	3	8	6	/
		545	6200-36-13C0.5L8M6	10	36	13	6200	0.5	8	6	/
		546	6200-36-13C1.5L10M8	10	36	13	6200	1.5	10	8	/
		547	6200-36-13C2.5L10M8	10	36	13	6200	2.5	10	8	/
		548	6200-36-13C3L10M8	10	36	13	6200	3	10	8	/
		549	6200-36-13C0.5L12M6	10	36	13	6200	0.5	12	6	/
		550	6200-36-13C1.5L12M8	10	36	16	6200	1.5	12	8	/
		551	6200-36-16C1L10M8	10	36	16	6200	1	10	8	/
		552	6200-36-16C1.5L10M8	10	36	16	6200	1.5	10	8	/
		553	6000-38-10C1L8M6	10	38	10	6000	/	8	6	/
		554	6000-38-10C1.5L8M6	10	38	10	6000	1.5	8	6	/
		555	6000-38-10C1.5L10M8	10	38	10	6000	1.5	10	8	/
		556	6000-38-10C1.5L12M6	10	38	10	600	1.5	12	6	/
		557	6000-38-10C1.5L25M8	10	38	10	6000	1.5	25	8	/
		558	6001-38-12C2L12M10	12	38	12	6001	2	12	10	/
		559	6001-38-12C3L12M10	12	38	12	6001	3	12	10	/
		560	6001-38-12C4L12M10	12	38	12	6001	4	12	10	/
		561	6001-38-12C6L20M10	12	38	12	6001	6	20	10	/
		562	6200-38-14C1L10M8	10	38	14	6200	/	10	8	/
		563	6200-38-14C2L10M8	10	38	14	6200	2	10	8	/
		564	6200-38-14C2.5L10M8	10	38	14	6200	2.5	10	8	/
		565	6200-38-14C1L12M8	10	38	14	6200	/	12	8	/
		566	6001-38-14C1L12M10	12	38	14	6001	1	12	10	/
		567	6001-38-14C2L12M10	12	38	14	6001	2	12	10	/
		568	6001-38-14C3L12M10	12	38	14	6001	3	12	10	/
		569	6001-38-14C5L20M10	12	38	14	6001	5	20	10	/
		570	6001-39-14C1L12M10	12	39	14	6001	/	12	10	/
Previous 1 2...17 181920 21...23 24 Next

1. What is a rubber-coated bearing?

A rubber-coated bearing refers to a non-standard bearing suitable for use under certain conditions, formed by injecting or bonding rubber products on the bearing surface through a casting mold.

2. Characteristics and classification of rubber-coated bearings

Rubber-coated bearings have excellent strength and wear resistance, heat resistance, hydrolysis resistance, and aging resistance. They have bright appearance, fine and smooth colloid surface, strong bonding between the colloid material and the shaft core, and a wide range of hardness.

In addition, rubber-coated bearings have the advantages of shock load resistance and low noise compared to ordinary bearings. Commonly used coating materials include the following:

(1) Polyurethane rubber rollers have good chemical properties, good solvent resistance, anti-aging, tear resistance, and good resilience.

(2) Silicone rubber coated bearings have good heat resistance, cold resistance, ozone and atmospheric aging resistance. The lack of electricity results in poor mechanical properties such as tensile strength and tear strength, and poor oil resistance and organic solvent resistance.

(3) Polyacetal (POM) coated bearings have high mechanical strength and rigidity, high fatigue strength, good resistance to organic solvents, and stronger wear resistance than polyurethane. However, they have the disadvantages of poor acid resistance, large molding shrinkage, and long life.

Easily decomposes under high temperature.

In addition, there are also rubber-coated bearings made of nitrile rubber, fluororubber and other coating materials.