Polyurethane molded bearing + stainless steel external thread

Send Inquiry

Description
Technical diameters

Inquiry	PDF	Polyurethane molded bearing + stainless steel external thread		Lagging size			Screw size				Replacement of Misumi code name
Inquiry	PDF	serial number	bearing No.	Inner diameter mm	Outer diameter mm	Thickness mm	Built-in bearing	Step protruding C	Screw length L	Thread M	Replacement of Misumi code name
		391	608-31-8C2.5L8M6	8	31	8	608	2.5	8	6	/
		392	608-31-8C8L8M6	8	31	8	608	8	8	6	/
		393	608-31-8C3.5L10M6	8	31	/	608	3.5	10	/	/
		394	608-31-8C3.5L10M8	8	31	8	608	3.5	10	8	/
		395	608-31-8C4L10M8	8	31	8	608	/	10	8	/
		396	608-31-8C4.5L10M8	8	31	8	608	4.5	10	8	/
		397	608-31-8C1L12M6	8	31	8	608	/	12	6	/
		398	398608-31-8C2.5L12M6	8	31	8	608	2.5	12	6	/
		399	608-31-8C2.5L15M6	8	31	8	608	2.5	15	6	/
		400	608-31-8C3L15M8	8	31	8	608	3	15	8	/
		401	608-31-8C4L15M⁸	8	31	8	608	4	15	8	/
		402	6000-32-10C1L8M6	10	32	10	6000	/	8	6	/
		403	6000-32-10C1.5L10M8	10	32	10	6000	1.5	10	8	/
		404	6000-32-10C1.5L12M6	10	32	10	6000	1.5	12	6	/
		405	6000-32-10C1.5L25M8	10	32	10	6000	1.5	25	8	/
		406	608-32-12C0.5L8M6	8	32	12	608	0.5	8	6	/
		407	608-32-12C6L8M6	8	32	12	608	6	8	6	/
		408	608-32-12C1.5L10M6	8	32	12	608	1.5	10	6	/
		409	608-32-12C1.5L10M8	8	32	12	608	1.5	10	8	/
		410	608-32-12C2L10M8	8	32	12	608	2	10	8	/
		411	608-32-12C2.5L10M8	8	32	12	608	2.5	10	8	/
		412	608-32-12C0.5L15M6	8	32	12	608	0.5	15	6	/
		413	608-32-12C1L15M8	8	32	12	608	/	15	8	/
		414	608-32-12C2L15M8	8	32	12	608	2	15	8	/
		415	626-33-7C0.5L7M6	6	33	/	626	0.5	/	6	/
		416	626-33-7C0.5L8M6	6	33	7	626	0.5	8	6	/
		417	626-33-7C1L8M6	6	33	7	626	/	8	6	/
		418	626-33-7C1.5L8M6	6	33	/	626	1.5	8	6	/
		419	626-33-7C2L8M6	6	33	7	626	2	8	6	/
		420	626-33-7C2.5L8M6	/	33	7	626	2.5	8	6	/
Previous 1 2...12 131415 16...20 21 Next

1. What is a rubber-coated bearing?

A rubber-coated bearing refers to a non-standard bearing suitable for use under certain conditions, formed by injecting or bonding rubber products on the bearing surface through a casting mold.

2. Characteristics and classification of rubber-coated bearings

Rubber-coated bearings have excellent strength and wear resistance, heat resistance, hydrolysis resistance, and aging resistance. They have bright appearance, fine and smooth colloid surface, strong bonding between the colloid material and the shaft core, and a wide range of hardness.

In addition, rubber-coated bearings have the advantages of shock load resistance and low noise compared to ordinary bearings. Commonly used coating materials include the following:

(1) Polyurethane rubber rollers have good chemical properties, good solvent resistance, anti-aging, tear resistance, and good resilience.

(2) Silicone rubber coated bearings have good heat resistance, cold resistance, ozone and atmospheric aging resistance. The lack of electricity results in poor mechanical properties such as tensile strength and tear strength, and poor oil resistance and organic solvent resistance.

(3) Polyacetal (POM) coated bearings have high mechanical strength and rigidity, high fatigue strength, good resistance to organic solvents, and stronger wear resistance than polyurethane. However, they have the disadvantages of poor acid resistance, large molding shrinkage, and long life.

Easily decomposes under high temperature.

In addition, there are also rubber-coated bearings made of nitrile rubber, fluororubber and other coating materials.